Husqvarna 525HE3 Manual Del Usuario página 11

Premixed fuel
• Use Husqvarna premixed alkylate fuel for
best performance and extension of the
engine life. This fuel contains less harmful
chemicals compared to regular fuel, which
decreases harmful exhaust fumes. The
quantity of remains after combustion is
lower with this fuel, which keeps the
components of the engine more clean.
To mix fuel
Gasoline
• Use good quality unleaded gasoline with a
maximum of 10% ethanol contents.
CAUTION:
with an octane grade less than 90
RON/87 AKI. Use of a lower
octane grade can cause engine
knocking, which causes engine
damages.
Two-stroke oil
• For best results and performance use
Husqvarna two-stroke oil.
• If Husqvarna two-stroke oil is not available,
use a two-stroke oil of good quality for air-
cooled engines. Speak to your servicing
dealer to select the correct oil.
CAUTION:
stroke oil for water-cooled
outboard engines, also referred
to as outboard oil. Do not use oil
for four-stroke engines.
To mix gasoline and two-stroke oil
Gasoline, liter
5
10
15
20
1173 - 001 -
Do not use gasoline
Do not use two-
Two-stroke
oil, liter
2% (50:1)
0.10
0.20
0.30
0.40
US gallon
1
2 1/2
5
CAUTION:
influence the ratio of the mixture
drastically when you mix small
quantities of fuel. Measure the
quantity of oil carefully and make
sure that you get the correct mixture.
1. Fill half the quantity of gasoline in a clean
container for fuel.
2. Add the full quantity of oil.
3. Shake the fuel mixture.
4. Add the remaining quantity of gasoline to
the container.
5. Carefully shake the fuel mixture.
CAUTION:
more than 1 month at a time.
To fill the fuel tank
WARNING:
that follows for your safety.
1. Stop the engine and let the engine become
cool.
US fl. oz.
2 ½
6 ½
12 ⅞
Small errors can
Do not mix fuel for
Obey the procedure
11