Husqvarna 525HE3 Manual Del Usuario página 3

23.Combination wrench
24.Operator's manual
25.Harness (525HE4)
Symbols on the product
Stop.
This product can be dangerous
and cause serious injury or death
to the operator or others. Be
careful and use the product
correctly.
Read the operator's manual
carefully and make sure that you
understand the instructions before
you use this product.
Use a protective helmet in
locations where objects can fall on
you. Use approved hearing
protection. Use approved eye
protection.
Always wear approved protective
gloves.
Use stable boots with non-slip
soles.
Stop the product fully before you
touch the cutting tool.
Keep all parts of your body away
from the hot surfaces.
Fuel.
yyyywwxxxxx
1173 - 001 -
The rating plate shows the serial number. yyyy is the production year
and ww is the production week.
Choke.
Air purge bulb.
Idle adjustment screw.
High speed needle.
Low speed needle.
There is no electrical insulation in
this product. If the product touches
or comes near high voltage power
lines, it can cause serious injury or
death to the operator. Electricity
can move between different
objects by a curve. The higher the
voltage, the longer the electricity
can move. Electricity can also
move through branches and other
objects, especially if the object is
wet. Always keep a distance at a
minimum of 10 m/33 ft between
the product and high voltage
power lines. Make sure that the
power is off before you start the
work near the power lines. Keep a
distance at a minimum of 15 m/50
ft to other persons or animals
during the operation.
3