Fuel Supply - Riello BG5 Instrucciones De Instalación, Uso Y Mantenimiento

3.3

FUEL SUPPLY

The burner is designed to allow entry of the oil supply pipes on either side.
Depending on the oil supply pipes position (to the right or to the left hand side of the burner) the fixing plate
(1) and cable clamp (2) should be reversed, (see fig. 6).
Fig. 6
1
3.4 ELECTRODES ADJUSTMENT,
ATTENTION:
MEASURES MUST BE RESPECT-
ED AND ALSO THE UPWARDS PO-
SITION.
Lean insulators (1) to disc (2), (see
fig. 7).
To have access to the electrodes
carry out operation as described in
chapter 4.2 (page 8) "RECOMMEND-
ED NOZZLES".
3402
2
(see fig. 7)
0
+
6,5
0,5 mm
2
1
3
D5757
5 GB
1
D5530
Fig. 7
8
mm