Metrohm 794 Basic Titrino Instrucciones Para El Uso página 87

E40
E41
E42
E43
E44
E45
E120
E121
E122
E123
E124
E125
E126
E128
E129
E130
E131
E132
794 Basic Titrino
RS send errors:
DSR=OFF No proper handshake for more than 1 s.
Exit: <QUIT> Is the receiver switched on and ready to receive?
DCD=ON No proper handshake for more than 1 s.
Exit: <QUIT> Is the receiver switched on and ready to receive?
CTS=OFF No proper handshake for more than 1 s.
Exit: <QUIT> Is the receiver switched on and ready to receive?
The transmission of the Titrino has been interrupted with XOFF for
at least 6 s.
Exit: Send XON or <QUIT>
The RS interface parameters are no longer the same for both
devices. Reset.
The receive buffer of the Titrino contains an incomplete command
(L missing). Sending from the Titrino is therefore blocked.
F
Exit: Send L or <QUIT>.
F
Overrange of the primary measured value (pH, U, Ipol, Upol or T
with MEAS T). The secondary measured value (temperature) may
be instable as well.
Exit: Correct error or &m $S.
Measuring point list overflow (more than 500 measuring points).
Exit: The error message disappears on next startup.
EP overflow.
Exit: The error message disappears on next startup or on
recalculation.
Missing EP for calculation.
Exit: The error message disappears on next startup or on
recalculation.
Number of EP does not correspond with the set windows.
Exit: The error message disappears on next startup or on
recalculation.
Missing fix EP for calculation, has not been defined.
Exit: The error message disappears on next startup or on
recalculation.
Fix-EP outside of measuring point list.
Exit: The error message disappears on next startup or on
recalculation.
No new mean.
Exit: The error message disappears on next startup or on
recalculation.
No new common variable, old value remains.
Exit: The error message disappears on next startup or on
recalculation.
Wrong sample. For SET with preset titration direction the first
measured value lies behind the endpoint.
Exit: The error message disappears on next startup.
No EP set for SET.
Exit: The error message disappears on next startup.
Silo empty and it has been started with open silo or empty silo has
been opened.
Exit: Send a silo entry.
3.1 General rules
83