diversey TASKI swingo XP-M IntelliSweep Manual De Instrucciones página 85

Manual program start XP-M
• Press the suction unit ON/OFF button.
The display lights up, the suction motor
starts and the squeegee is automatically
lowered to the operating position.
• Press the Cleaning solution supply ON/OFF
button.
The display lights up.
The cleaning solution supply is started when
the brushes rotate.
• Select the desired dosing by pressing the +/
- buttons from level 1-6.
Notice:
Diversey recommends a sustainable work-
ing by determination of the correct product
dosing quantity. Overdosing or underdos-
ing will lead to unsatisfactory cleaning re-
sults.
Notice:
TASKI offers an automatic dosage feature
as an option. It is possible to mount it addi-
tionally. Please contact your customer ser-
vice.
• Press the Brush drive ON/OFF button.
The display lights up and the brush unit is
lowered.
• Select the desired brush pressure by press-
ing the +/- buttons from level 1-3.
Notice:
Always calculate and select the lowest lev-
el that is sufficient for good cleaning re-
sults. Thus you will optimize power
consumption and increase the service life
of the machine.
ECO mode
• The ECO mode is activated by pressing the
ECO mode ON/OFF button.
Notice:
If necessary, the cleaning solution and
brush pressure can be manually adjusted
in ECO mode. The ECO mode is suitable
for smoother floors without joints.
Spot mode
• The spot mode is activated by pressing the
spot mode ON/OFF button.
Notice:
If necessary, the cleaning solution and
brush pressure can be manually adjusted
in spot mode. The spot mode is suitable for
heavily soiled floors.
Starting the machine using the program button
• By pressing the program button for the next
operation start or work step, all machine
functions are started on the basis of the
functional values last used.
• In addition, the front cleaning brushes and
lateral cleaning brushes are automatically
lowered to working position.
Notice:
The corresponding function is deleted by
pressing any function button. The suction
motor is still on for a specified time in order
to reduce dripping. The display flashes un-
til the suction motor is switched off.
Notice:
The preset values can be adjusted at any
time during operation. The values preset
when switching off the machine are stored
and will be automatically activated when
restarting the machine.
Notice:
Pressing the program button when the
cleaning process is finished will start an
optimized program for the end of opera-
tion. See instructions on page 85 in the
"Automatic process" chapter.
Settings and activated functions are
saved.
Working with front and lateral cleaning only
• Press the program start/stop button.
The suction motor starts and the squeegee
is automatically lowered to the operating po-
sition.
The cleaning solution supply is started when
the brushes rotate.
The brush unit is lowered.
The front cleaning brushes and lateral clean-
ing brushes are automatically lowered to the
working position.
• Press the cleaning solution supply ON/OFF
button to stop them.
• Press the unit drive ON/OFF button to lift
and stop them.
EN
83