Batteries - diversey TASKI swingoBot 2000 Manual De Instrucciones

Batteries

Permissible batteries
Traction batteries are required for the use of this machine (no
starter or device batteries). We recommend the use of pure
traction batteries. Only these batteries guarantee a long ser-
vice life.
Traction batteries are produced as maintenance-free (VRLA)
batteries (Gel). The machine must be adjusted according to
each construction type and manufacturer.
Each battery has a different service life and performance.
Attention:
Do not use different, old batteries with new
or defective batteries.
Attention:
Old and/or defective batteries must be dis-
posed of properly. See the information on
page 81
Safety measures to be taken when handling the batteries
• Batteries contain acid. Always wear
safety goggles for the maintenance,
installation and removal of wet-cell
batteries.
• Rinse acid splashes in your eyes or
on your skin with plenty of clear wa-
ter.
Then immediately consult a doctor.
Wash your clothes with water.
• Charging batteries creates a danger-
ous gas mixture. Keep away from
open fire or glowing embers.
• Do not smoke!
• Danger of acid burns!
• Attention! The battery poles are al-
ways energized. Therefore do not
deposit any objects on the batteries!
Attention:
Keep batteries clean and dry. Immediately
wipe off leaking acid or water (wet-cell bat-
teries).
Wear protective gloves for this purpose.
70
Attention:
Batteries may only be installed by service
agencies or experts approved by Di-
versey; they must be installed in compli-
ance with the connection diagram.
Installation and/or connection errors may
result in severe injury, explosion and major
damage to the machine and the environ-
ment.
Attention:
The product-safety-data-sheet provided
by the battery manufacturer must also be
observed.
Attention:
The operating instructions provided by the
battery manufacturer must also be ob-
served.
Attention:
Provide adequate ventilation when
charging the battery.
Insert/remove battery box
Attention:
The insertion or removal of the battery box
generally may only be carried out by two
people.
Caution:
The insertion or removal of the battery box
generally may only be carried out using a
battery tray (optional).
Attention:
Lifting the battery box can be dangerous
under any circumstances!
The heavy weight of the battery box can
result in injuries to persons or damage to
machines.
• The machine must be switched off (main switch button).
• Wait until the system has shut down and the machine has
been turned off completely.
• The battery box can now be inserted or removed.
> 130 kg
> 290 lbs