Technical Data; Accessories; Error Codes; Loading And Transport - diversey TASKI swingoBot 2000 Manual De Instrucciones

Technical data

Machine
Working width
Suction nozzle / squeegee
width
Dimensions (L x W x H)
Maximum weight of opera-
tional machine
Rated voltage
Rated power, nominal
Fresh water tank, nominal
+/- 5%
Values according to IEC
60335-2-72
Machine weight with batter-
ies (transport weight)
Sound pressure level LpA
Uncertainty KpA
Vibration (Manual mode)
Uncertainty K
Splash water guard
Protection class

Accessories

No. Item
8501120 Pad drive harpoon grip 35 cm
8501080 Scrubbing brush, nylon, 35 cm
8501060 Scrubbing brush, washed con-
crete, 35 cm
8502750 Scrubbing brush, abrasive, 35 cm 2x
7524346 Battery tray
7524347 Battery tray RTU (ready-to-use)
7524344 Battery box (without batteries)
7524345 Battery box (with batteries)
IntelliTrail
Various pads (polyester brown,
blue, red, and contact pad)
80
70 cm
90 cm
135 x 90 x 129 cm
471 kg
24V DC
1500 W
90 l
376 kg
<70 dB(A)
2.5 dB(A)
< 2.5 m/s2
0.25 m/s2
IPX3
III
2x
2x
2x
x
x
x
x
x
x

Error codes

Error codes are indicated on the display.
Notice:
Switch the machine off and on again
whenever an error code occurs.
Error codes might be remedied simply by
switching the machine off and on again.
Notice:
You can find a list of the error codes and
their meaning in the Service Tool Manual.

Loading and transport

Attention:
Prior to loading for transport, the following
must be done:
- the machine must be switched off (load-
ing with lifting platform or pallet);
- the machine must be switched on, manu-
al mode (loading via ramp);
- the fresh water and the recovery tank
must be emptied completely.
Attention:
When loading the machine via the ramp,
the machine front must be lifted up. This
ensures that there is more ground clear-
ance. To do this, pull on the tank release
for more ground clearance (see structural
overview on page 69).
Attention:
It is prohibited to drive on ramps sideways
during loading operations.
This can cause the machine to tip over and
cause damage to persons, the machine, or
the surroundings.
Attention:
Note the payload of the lifting platform or
ramp!
Attention:
This machine may only be lifted using lift-
ing gear (e.g. hoist, loading ramp, etc.).
Attention:
This machine has no lifting points for lifting
with a crane or similar. For this type of
loading, the machine must be mounted on
a pallet.
Lifting the machine with tension straps can
cause damage to persons, the machine
and the environment.
Notice:
Transport the machine in an upright posi-
tion.