Mapping; Starting The System; Beginning Work With The Machine - diversey TASKI swingoBot 2000 Manual De Instrucciones

Pre-cleaning
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro-
tating tool, and thereby cause injuries to
people and damage to the environment.

Mapping

Notice:
You can find the exact details and descrip-
tions in the mapping handbook.

Starting the system

Notice:
The display must be clean to ensure its
functionality.
Do not stick or place anything on the dis-
play.
• Switch the machine on. Press and hold the main switch
button until the switch illumination turns on, approx. two
seconds.
Notice:
It takes approximately 2 minutes for the
machine to fully power up
• Touch the LOG IN button.
• Enter your operator code and touch
OK.
1 2 3
4 5 6
7 8 9
0
OK
• The Prep Step Guide will appear.
• Move to the Home Screen by touch-
ing OK.
OK
• To access the Functions screen,
touch the right arrow.

Beginning work with the machine

Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
Attention:
If there is a danger of falling objects during
use of the machine, the necessary safety
precautions must be taken or adhered to in
accordance with national regulations.
Notice:
When working in public buildings, the
warning light must be switched on.
Notice:
Please keep both hands on the driving
handles when operating the machine in
"Manual mode" in order to ensure safe op-
eration.
Attention:
Before beginning work (in the work posi-
tion), check whether your field of vision is
sufficient to ensure safe working.
An insufficient field of vision can make
work difficult and therefore impair safety
for the operator, machine and third parties.
• Check whether the emergency stop button is released.
• Switch on the machine (main switch button).
It takes approximately 2 minutes for the machine to fully
power up.
Triggering the floor sensors
Attention:
This machine is equipped with ground
sensors for detection of obstacles and un-
even ground, such as stairs. A message is
shown on the display.
The machine must be displaced manually
by pressing the emergency stop!
Incorrect handling can lead to personal in-
jury and damage to the machine.
Operating Modes
• Manual mode:
Allows you to control all cleaning functions including speed
• Automatic mode:
Allows you to let go while the machine cleans the area au-
tomatically
EN
75