How Do I Enable Ddns On My System - Lorex L23WD800 Serie Manual Del Usuario

Tabla de contenido

Publicidad

How Do I Enable DDNS On My System?

Once you have registered for free DDNS service, use the information in the confirmation email to
configure DDNS settings on your system.
To enable DDNS on your system:
1. Click the SETUP button (
2. Click SYSTEM SETUP.
3. Click NETWORK.
• The Network window opens.
4. Click the DDNS tab on the left.
• The DDNS window opens.
Figure 30.0 Enabling DDNS.
5. Under USER ID, enter your DDNS user name.
6. Under DOMAIN NAME, enter only the first portion of your DDNS domain from the
confirmation email. For example, if your domain name is tomsmith.lorexddns.net, you only
need to enter tomsmith in the text field.
7. Under PASSWORD, enter your DDNS password.
8. Click APPLY to save your settings or click CANCEL to restore defaults.
9. Click STATUS to ensure the DDNS has been set up correctly. If the DDNS is set up correctly, a
message will read "Success". If the DDNS is not set up correctly, a message will read "Fail".
10. Click CLOSE to exit.
With DDNS entered on your system, you can access your DVR from a remote location by entering
the Lorex DDNS domain name in your web browser on your computer or mobile device.
) in the Status Bar.
Setting Up DDNS Service
ATTENTION: You must enter your
DDNS information locally (on your
local network) before attempting to
connect to your system from a
remote location using DDNS.
135

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

L23wd1600 serie

Tabla de contenido