Screen Saver - Lorex L23WD800 Serie Manual Del Usuario

• The Sequence window opens.
Figure 11.11 Sequence window (spot out).
• To delete a sequence, right-click on the
desired sequence icon, and then click
DELETE.
6. Double-click on the desired sequence icon
you wish to edit.
• The Spot Sequence Setup window opens.
Figure 11.12 Spot Sequence Setup.
7. Under CONFIGURE, select the channel you
wish the sequence to display.
Only single channel configurations
NOTE:
are available for spot out sequences.
8. Click CONFIRM.
9. Click CLOSE and then click APPLY to save
your settings.

SCREEN SAVER

The Screen Saver tab allows you to configure
when the system's display turns on and off.
To edit the Screen Saver display modes:
1. Click the SCREEN SAVER tab on the left.
• The Screen Saver window opens.
Figure 11.13 Screen Saver window.
2. Under AUTO BRIGHTNESS, click
select the duration of inactivity before the
system display turns off (system will
continue to record). For example, if you
select 10 MIN, the system's display turns
off if you do not move the mouse within 10
minutes.
• Select from OFF, 10~60 mins.
3. Under MAIN DISPLAY OFF, click
select ON/OFF to enable or disable the
system from turning off the display for a
scheduled period.
4. Under FROM and TO, click
the time period you want the system
display to turn off.
5. Click APPLY to save your settings.
The "Main Display Off" feature is useful if you
wish to conserve power. For example, you can
have the system's display turn off at night from
9:00 p.m until 8:00 a.m.
Customize the monitor's on/off schedule
according to your needs.
Using the System Menu
to
to
to select
59