Continuous + Motion Recording; Alarm Recording; Panic Recording; Recording Audio - Lorex L23WD800 Serie Manual Del Usuario

Continuous + Motion Recording

The system records continuously from any connected cameras. When motion is detected, the
system will record according to customizable motion recording parameters.

Alarm Recording

When an alarm input is triggered, the system will continue to record, but can apply unique
recording parameters that you can set in the Alarm menu (Main Menu>Alarm). You can also set
the system to activate an alarm output. For example, if a window sensor (not included) connected
to the alarm input block on the rear panel is triggered, the system begins alarm recording and
simultaneously activates an external siren (not included) connected to the alarm output block on
the rear panel.

Panic Recording

Click (REC) in the Status Bar to start/stop Panic Recording. Panic Recording features the
highest quality recording parameters available on the system. A "!" (exclamation mark) appears
in the top-right corner during Panic Recording.
Panic Recording will override any functions or operations currently on the system.
NOTE:
Figure 6.3 Panic Recording icon (top-right corner).

Recording Audio

The system can record up to four channels of audio. You must have an audio enabled camera or
self-powered microphone connected to the system in order to use this function. You can enable/
disable audio recording in the Continuous/Motion Recording menu. For details, see "Continuous
/ Motion Recording" on page 77.
An exclamation mark indicates
panic recording is enabled
Recording
37