SYSTEM
Configure date and time, system
management settings, and control
device options.
DATE/TIME
Use the Date/Time menu to configure the date,
time, and time format on the system.
To configure date/time settings:
1. Click the SETUP button (
Status Bar.
2. Click SYSTEM SETUP.
3. Click SYSTEM.
• The System window opens.
Figure 13.0 Date/Time menu.
4. Configure the following:
• DATE TIME: Select the year, month, day,
hour, minutes, and seconds and adjust
using the arrows (
For more details on setting the time
NOTE:
on the system, see "Setting the Time" on
page 37.
• DATE FORMAT: Select YYYY / MM / DD
(default), DD / MM / YYYY, or MM / DD /
YYYY
• TIME FORMAT: Select 24 HOUR (default)
or 12 HOUR
• NETWORK TIME SERVER: Click SYNC. to
synchronize the system time with the
network server.
Network connection required. You
NOTE:
can set the time on the system using the
5. Click APPLY to save your settings or click
) in the
SYSTEM MANAGEMENT
Use the System Management menu to view
system information, edit the system name,
upgrade firmware, and restore factory
defaults.
System Information
To view system information:
1. Click the SYSTEM MANGEMENT tab on the
).
Figure 13.1 System Management window
2. Beside System Information, click INFO.
Using the System Menu
Network Time Server or through manual
configuration. For more details, see
"Setting the Time" on page 37.
• AUTO TIME SYNC: Select ON for the system
to regularly sync the time with the time
server.
• TIME ZONE SETUP: Select various GMT
time zones.
• D.S.T.: Select ON/OFF to enable/disable
daylight savings time on the system
CANCEL to restore defaults.
left.
• The System Management window opens.
61