Pip Settings; Pip Position Sub Menu; Pip Color Controls Sub Menu - Lorex L23WD800 Serie Manual Del Usuario

Adjusting Display Settings

PIP SETTINGS

Figure 4.9 PIP menu.
Use the Navigation keys on the front panel or
remote control to select from PIP, PIP Input
Select, PIP Size and Blend. Use the enter key to
access the PIP Position or Pip Color Control
submenus. Change the values using the arrow
keys and enter.
• PIP: Turns the display of the PIP (Picture
in Picture) ON or OFF. If you turn the PIP to
OFF, the default DVR screen will not be
displayed when the PIP button on the
remote control is pressed.
• PIP Input Select: Select the input type for
the PIP. By default, the unit will display the
DVR screen.
• PIP Size: Change the display size to Small,
Medium or Large.
• PIP Position: Change the location of the
PIP window.
• PIP Color Controls: Adjust Brightness,
Contrast, Hue, and Saturation for the PIP
window.
• Blend: Adjust the transparency of the PIP
window.
24

PIP Position sub menu

Use the Up, Down, Left and Right arrows to
adjust the location of the PIP Screen. Press the
Enter button to set, and the Return button to
exit the menu.
Figure 4.10 PIP position window.

PIP Color Controls sub menu

Use the Up, Down, Left and Right arrows to
adjust the settings for Brightness, Contrast,
Hue and Saturation. Press the Enter button to
set, and the Return button to exit the menu.
Figure 4.11 PIP Color Controls menu.