Safety
Basic hazards
2.2 Basic hazards
Adhere to the statutory regulations for health and safety (
nerally accepted safety and occupational health rules and the relevant accident
prevention regulations (
Do not underta e any modifications to the system components in the mecha-
nical or electrical area.
he manufacturer is not liable for damage arising from improper alterations to
the system components.
2.3 Personnel requirements and notes on installation
Assembly and installation must be carried out by competent installers accor-
ding to the requirements on qualification as per national and local regulations.
ee D N N
D N
he generally accepted rules of technology (Aa d ) must be follo ed, both
when assembling the drinking water installation and when installing and pro-
gramming the e
hen planning and setting up sanitary facilities, observe the corresponding lo-
cal, national and international standards and regulations.
he
144
).
Danger!
The eSchell water management system does not check whether
people are in the immediate vicinity of the flushing fittings
before stagnation flushes are initiated.
n the event of improper use, there is a ris of scalding and damage
to property.
> tagnation flushes must only be carried out by competent persons.
t must be ensured that nobody is in the immediate vicinity of the
flushing fittings at the time of the stagnation flushes.
Warning!
Warning about unauthorised access to the system by third par-
ties.
f the e chell
ater management system is operated via
impossible from a technical perspective to rule out unauthorised third
parties gaining access to control of the system and initiating flushes.
> Flushes which are initiated without authorisation threaten physical
injuries in the form of scalds and damage to property.
et seq
echnical rules for drin ing
et seq.
LL
ater management system.
LL
eneral installation conditions at
) and all other ge-
LAN, it is
ater installations ,
.schell.eu apply.