Cable Types Usable For The Bus Line - Schell eSCHELL 00 500 00 99 Manual Del Sistema

Roughing-in assembly
Routing bus lines
The bus line is connected to the "BUS" terminal on the eSCHELL cable bus
extender BE-K.
Only one wire per connection point may be connected on this terminal. Bran-
ching the bus line in the eSCHELL cable bus extender BE-K is therefore not
permitted.

5.3.4 Cable types usable for the bus line

The following cable types can be used as a bus line:
– H(St)H 2x2x0.8
– YCYM 2x2x0.8
– J-Y(St)Y 2x2x0.8
– JH(St) 2x2x0.8
158
eSCHELL GND bus supply (V
eSCHELL 30 V bus supply (V
6-7 mm
Fig 14: Connection of the bus cable to the eSCHELL cable bus extender BE-K
-)
in
+)
in