Attaching The Fan Blades; Attaching The Blades To The Motor Assembly - Kichler Bezel 300318 Manual De Instrucciones

ATTACHING THE FAN BLADES

Step 1. Step 1. Place the blade over the blade holder, make sure the bottom edge of Place the blade over the blade holder, make sure the bottom edge of
the blade is fully seated against the blade holder, securely tighten the blade the blade is fully seated against the blade holder, securely tighten the blade
to the blade holder with three (3) blade screws and washers. Repeat for to the blade holder with three (3) blade screws and washers. Repeat for
remaining blades. (Fig. 19) remaining blades. (Fig. 19)
ATTACHING THE BLADES TO THE MOTOR
ASSEMBLY
Step 1. Carefully insert the blade holder into the slot as shown. (Fig. 20) Step 1. Carefully insert the blade holder into the slot as shown. (Fig. 20)
Step 2. Align with two (2) screw holes and securely fasten with blade holder Step 2. Align with two (2) screw holes and securely fasten with blade holder
screws found on the hardware package. (Fig. 21) screws found on the hardware package. (Fig. 21)
Fig. 19
Blade Holder
Screw
Fig. 21
Blade Screw
Blade Washer
Blade
Blade Holder
Blade Holder
Fig. 20
52" Bezel LED | 13