Installing The Light Kit And Acrylic Shade - Kichler Bezel 300318 Manual De Instrucciones

INSTALLING THE LIGHT KIT AND ACRYLIC SHADE

NOTE: NOTE: Before continuing installation, confirm that the power is still turned off Before continuing installation, confirm that the power is still turned off
at the main circuit breaker or by removing the circuit fuse. Turning the power at the main circuit breaker or by removing the circuit fuse. Turning the power
off using a wall switch is not sufficient to prevent electrical stock. off using a wall switch is not sufficient to prevent electrical stock.
Step 1. Remove one of three screws on the light plate and keep for later use, Step 1. Remove one of three screws on the light plate and keep for later use,
loosen the other two (do not remove). (Fig. 23) loosen the other two (do not remove). (Fig. 23)
Step 2. Step 2. Hold the light kit close to the light plate and connect the WHITE wires Hold the light kit close to the light plate and connect the WHITE wires
from the light kit and fan by pushing the connectors together. Follow the from the light kit and fan by pushing the connectors together. Follow the
same procedure with the BLACK wires. (Fig. 24) same procedure with the BLACK wires. (Fig. 24)
Step 3. Tuck the connections neatly into the light kit. Place the two slot holes Step 3. Tuck the connections neatly into the light kit. Place the two slot holes
on the light kit over two (2) screws previously loosened from the light plate. on the light kit over two (2) screws previously loosened from the light plate.
Rotate the light kit until it locks in place at the narrow end of the key holes. Rotate the light kit until it locks in place at the narrow end of the key holes.
Securely tighten two(2) screws previously loosened and the one previously Securely tighten two(2) screws previously loosened and the one previously
removed. (Fig. 24) removed. (Fig. 24)
Step 4. Secure the acrylic shade to light plate by twisting in a clockwise Step 4 . Secure the acrylic shade to light plate by twisting in a clockwise
direction, twist the acrylic shade gradually until it snaps on to the light plate. direction, twist the acrylic shade gradually until it snaps on to the light plate.
Do not over - tighten. (Fig. 25) Do not over - tighten. (Fig. 25)
Light Plate
Screw
Fig. 23
Screw
Fig. 24
Acrylic Shade
Fig. 25
52" Bezel LED | 15
Light Kit