Installing The Blade Holder Ring - Kichler Bezel 300318 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING THE BLADE HOLDER RING

Motor Assembly
NOTE:
NOTE: Before continuing, make sure the power is disconnected by turning
Before continuing, make sure the power is disconnected by turning
off the circuit breaker or removing the fuse at the circuit box.
off the circuit breaker or removing the fuse at the circuit box.
Step 1.
Step 1. Place the blade holder ring up to the motor assembly, and put the
Place the blade holder ring up to the motor assembly, and put the
Blade Holder Ring
four positioning posts on the blade holder ring to four holes on the motor
four positioning posts on the blade holder ring to four holes on the motor
Fig. 18a
assembly, so that four holes on the blade holder ring align with the four holes
assembly, so that four holes on the blade holder ring align with the four holes
on the motor assembly. (Fig. 18)
on the motor assembly. (Fig. 18)
Fig. 18b
Fig. 18c
12 | KICHLER.COM

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido