Installing The Light Plate - Kichler Bezel 300318 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING THE LIGHT PLATE

Step 1.
Step 1. Remove one of three screws which preinstalled on mounting plate
Remove one of three screws which preinstalled on mounting plate
and keep for later use. Loosen the other two (do not remove). Place the two
and keep for later use. Loosen the other two (do not remove). Place the two
slot holes on the light plate over the 2 screws previously loosened from the
slot holes on the light plate over the 2 screws previously loosened from the
mounting plate. Rotate the light plate until it locks in place at the narrow end
mounting plate. Rotate the light plate until it locks in place at the narrow end
of the key holes. Secure by tightening the 2 screws previously loosened and
of the key holes. Secure by tightening the 2 screws previously loosened and
the one previously removed. (Fig. 22)
the one previously removed. (Fig. 22)
Mounting Bracket
Fig. 22a
Light Plate
Fig. 22b
14 | KICHLER.COM

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido