Important
EN
16
Safety instructions
•
Smoking and open flames are strictly prohibited
in the vicinity of all fittings containing or trans-
porting oxygen.
•
During assembly and when changing oxygen
bottles only hand-tighten screwed connections
to the bottle and the pressure reducer. Never use
tools for this purpose. Excessive tightening dam-
ages the screw threads and seals, and can cause
leaks.
•
Protect oxygen cylinders from accidental falls. If a
cylinder falls over, the pressure reducer or the
valve may break off and cause a violent explo-
sion.
•
Always open the bottle valve slowly to stop pres-
sure hammer to the fittings.
•
The oxygen cylinder should never be completely
emptied, as this may allow air containing mois-
ture to enter the cylinder and cause corrosion.
Ventilation/Operation
•
Both patient and ventilator must be kept under
constant observation during ventilation.
•
When connecting the patient valve, please ensu-
re that the direction of respiratory gas flow
(> patient >) is correct. Make sure that neither
the expiration tube nor the spontaneous breath-
ing tube on the patient valve are blocked or their
function impeded in any other way, e.g. by the
patient's position.
Note
•
Disposable hose system WM 28110 is intended
to be used only once.
Software
•
Extensive validation tests have been performed
to minimize risks arising from software errors.