Disassembly And Disposal; Safety Information For Disassembly And Disposal; Disassembly; Disposal - RK Rose+Krieger MonoLine R Instrucciones De Montaje

8

Disassembly and disposal

8.1 Safety information for disassembly and disposal

Improper disassembly

8.2 Disassembly

8.3 Disposal

26.03.2019
WARNING!
Risk of injury in the event of improper disas-
sembly!
Sharp-edged components, tips and corners on the
linear unit or the required tools can cause injury.
–
–
–
–
–
–
Before starting disassembly:
n Physically disconnect the linear unit from the electrical power
supply (if available).
n Dispose of operating materials in an environmentally friendly
manner.
Then clean the modules and components properly and disas-
semble them, adhering to the applicable local occupational health
and safety and environmental protection regulations.
If no return or disposal agreement was concluded, have disas-
sembled components recycled:
Scrap metals.
n
n Have plastic components recycled.
n Dispose of other components sorted by their material composi-
tion.
Linear unit RK MonoLine R/RK MonoLine Z
Disassembly and disposal
Ensure that there is sufficient space before starting
work.
Handle exposed components with sharp edges
carefully.
Ensure that the work area is clean and tidy at all
times! Components and tools lying around or on
top of one another are sources of accidents.
Disassemble components properly. Observe the
components' sometimes high net weight. If neces-
sary, use lifting gear.
Secure components so that they do not fall down
or topple over.
Consult with the manufacturer in the event of
uncertainties.
Disposal
115