RK Rose+Krieger MonoLine R Instrucciones De Montaje página 103

Assembling the drive shaft
Fig. 30: Assembling the drive shaft
Applicable to
Assembling the drive shaft
Fig. 31: Assembling the drive shaft
26.03.2019
3. Place the drive shaft (Fig. 30/2) on the adapter washer
(Fig. 30/1).
4. Tighten 4 screws (Fig. 30/3) alternating diagonally:
Size
40
80, 120
ð The drive shaft is assembled.
Version
Size
Personal:
Schutzausrüstung:
Prerequisite:
n The electric gear unit and/or motor (if available) are secured
against restarting.
1. Place the drive shaft (Fig. 31/2) on the timing belt shaft
(Fig. 31/1).
2. Tighten 4 screws (Fig. 31/3) alternating diagonally:
Size
60
ð The drive shaft is assembled.
Linear unit RK MonoLine R/RK MonoLine Z
Assembling optional modules > Assembling the drive shaft
Screw size
M4
M6
The drive shaft for the RK MonoLine Z 80 and
120 are connected to the adapter washer with
8 screws each.
RK MonoLine Z
60
n Assembly staff
n Protective clothing
Protective gloves
n
Safety shoes
n
Screw size
M8
Assembly
Tightening torque [Nm]
3
15
Tightening torque [Nm]
25
103