RK Rose+Krieger MonoLine R Instrucciones De Montaje página 98

Assembly
Assembling optional modules > Assembling the motor
Assembling the motor
Fig. 21: Assembling the motor
98
10. Place the motor (Fig. 21/3) on the motor plate (Fig. 21/2).
11. Tighten 4 screws (Fig. 21/1) alternating diagonally:
Size
40
60, 80
120
ð The motor is assembled.
Linear unit RK MonoLine R/RK MonoLine Z
Ensure that the clamping hub on the motor shaft
engages correctly in the screw-in hub on the
timing belt shaft.
Screw size
M5
M6
M5
M6
M8
M10
M12
Refer to the table for the screw size and the
associated tightening torque which correspond to
the motor to be installed.
Tightening torque [Nm]
5.9
10
5.9
10
25
49
85
26.03.2019