Clamping Bars; Slot Stones; Centring Sets - RK Rose+Krieger MonoLine R Instrucciones De Montaje

Set-up and function
Optional modules > Centring sets

3.3.5 Clamping bars

Fig. 9: Clamping bars

3.3.6 Slot stones

Fig. 10: Slot stones

3.3.7 Centring sets

Fig. 11: Centring sets
90
The clamping bars are inserted on the side of the guide profile and
are used as a fixing element between the linear unit and the sub-
strate.
Further information:
n Assembling the linear unit with clamping bars
The slot stones are inserted on the underside of the guide profile
and are used as a fixing element between the linear unit and the
substrate.
Further information:
n Assembling a linear unit with slot stones
A Centring set for RK MonoLine R, Z 40
B Centring set for RK MonoLine R, Z 60/80/120
The centring sets are assembled in the holes provided for this pur-
pose on the guide carriage and are used as a positioning aid.
Further information:
n Assembling centring sets
Linear unit RK MonoLine R/RK MonoLine Z
Ä Page 93
Ä Page 94
Ä Page 107
26.03.2019