Maintenance And Care - AL-KO PROFI V3000 Manual De Instrucciones

en
1. Loop the breakaway cable around the ball
neck (3).
2. Hook the carabiner around the cable.
Possible variant 1
1. Loop the carabiner through the eye provided
on the towing vehicle (4).
2. Hook the carabiner around the cable.
Possible variant 2
CAUTION!
Possible only with carabiner hooks com-
plying with DIN 5299 - min.70 mm (fire
brigade carabiner).
1. Engage the carabiner hook in the eye provi-
ded (5).
Regulation for the Netherlands
1. Loop the breakaway cable around the ball
neck and through the eye provided (6).
2. Hook the carabiner around the cable.
Handbrake
Safety
CAUTION!
Danger from uncontrolled movement. Al-
ways apply the handbrake lever fully!
Operating the hand brake:
Applying
1. Pull the hand-brake lever beyond the notice-
able dead-centre position.
Lösen
1. Stellen Sie den Handbremshebel über den
Totpunktbereich in die Ausgangsstellung zu-
rück.

MAINTENANCE AND CARE

CAUTION!
Danger!
Always secure the trailer with chocks
prior to performing any maintenance and
care jobs.
The overrun hitch is a component of the
brake system. Irrespective of the service
intervals for the overrun hitch, the brake
system must be checked by a specialist
workshop after 1500 km or 6 months.
During maintenance, care, and inspection work all
system components must be checked to ensure
12
they are in a safe operating state and in perfect
working order.
Limited liability
Checking the brake system does not mean
that the prescribed maintenance measures
for the overrun hitch can be neglected.
The manufacturer cannot be held liable for in-
jury to personnel and damage to material attri-
butable to failure to comply with the safety re-
gulations and to carry out the indicated main-
tenance work.
Oil and lubricating points
Lubricate or oil sliding and articulation points
on the overrun hitch 10000 - 12000 km or
every 12 months.
REPAIR
Replacement parts are safety parts!
For the installation of replacement parts
into our products, we recommend the
use of original AL-KO parts, or of parts
that we have expressly approved for in-
stallation. For the clear identification of
replacement parts, our service stations
require the replacement part identifica-
tion number (ETI).
Repairs may only be carried out by compe-
tent, trained personnel.
If repairs are necessary, an extensive network
of AL-KO service stations is available for our
customers across Europe.
You can request the service station directory
from us whenever you need using the order
number 371912.
Identification plate
XXX XXX
ETI
Zn
UH 90:XX
1 Spare part identification number (ETI)
2 Drawing number
XXXXX
1
2
1362723_f