Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
All error and
warning messages
are alternately
shown in line 1 of
the standard
display!
NOTE
Display functions
Inlet
Analysis
valve
running
1 Limit value status displays (red/green)
The display 1 illuminates red if limit value 1 has been reached or
exceeded. The display 1 illuminates green if the value falls below
the limit value. The same principle applies to limit value 2 and
display 2.
2 Text display (4 lines)
Displays the current analysis result as well as all important
statuses and programming data.
2a = The current measured value for measuring point 1 (M1) and
2 (M2) is displayed in line 2 and 3.
Value falls below the measuring range = "<" e.g. M1: < 0.89
ppm CaCO
3
Value exceeds the measuring range = ">" e.g. M1: > 179
ppm CaCO
3
2b = The set limit values LV1 and LV2 are displayed in line 4
3 Alarm (red)
Indicates malfunctioning/error message or warning message.
4 Maintenance message (yellow)
Indicates current maintenance requests
5 Status display of the active instrument components (line)
Six displays indicate the current instrument and analysis status
Canceling error messages/warning messages
Press
to acknowledge the message and, if necessary,
eliminate the cause of the fault.
Functions of the operating and display elements
2a
Outlet
Dosing
valve
message
2b
Analysis
BOB-
stop
mode
active
21
Publicidad
Tabla de contenido
