miniland baby Digital Camera Plus Manual Del Usuario página 15

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
ENGLISH
7. DO NOT attempt to repair or adjust any of the electrical or mechanical functions of the unit
since, if you do, the guarantee will be made void.
8. Check the voltage of your home in order to ensure that it matches the voltage indicated in the
specifications of the appliance.
9. If you are not going to use the baby monitor for a long period of time, always unplug the power
adapter. To disconnect the appliance from the mains, hold the transformer and remove the plug
from the socket. Never pull on the cord itself.
10. This product is designed for indoor use only. The unit should not be exposed to rain,
moisture, dripping or splashing. No objects filled with liquid should be placed on top of, or beside
the product, such as a glass or vase. This item should not be used near water.
CAUTION
• This baby monitor is designed to give parents peace of mind when they are unable to be in the
same room as their baby. This product is not a substitute for supervision by adults. It is necessary
for one parent to stay near the monitor when in use. The baby monitor is not a medical device
and you should not entrust the welfare of your baby to it. It is important that you regularly visit the
baby's room in person to ensure that everything is in order.
• Never use this baby monitor in cases in which the life or health of the baby or other people,
or the integrity of a building, depend on its operation. The manufacturer accepts no liability or
claim for death, personal injury or property damage resulting from the malfunction or misuse of
the product.
• Misuse of this Wireless Baby Monitor could result in legal action.
• Use this product responsibly.
IMPORTANT: Please note that any change or modification to the equipment not performed
by the Miniland technical service will not be covered by the product guarantee.
3.2. RADIO INTERFERENCE TIPS
This equipment has been subjected to tests and complies with the requirements of the R&TTE
Directive 1999/5/EC. These requirements are designed to provide reasonable protection from
harmful interference at residential premises. If the unit is not installed and used in line with the
instructions, this could cause harmful interference to the radio communications. However, bear
in mind that it is not possible to ensure that interferences are not going to occur at a specific
installation. If the baby monitor causes interferences to radio or TV reception, which may be
determined by turning it off and on, the user is recommended to try and rectify the interference
in the manner indicated below
• Reorient or change the position receiver.
• Increase the distance between the equipment in question and the baby monitor.
• Connect the equipment to a different socket from that used for the receiver.
• Consult the Customer Care department.
To ensure compliance with the R&TTE Directive 1999/5/EC, this equipment has special shielded
cables. Operating with unapproved equipment or using unshielded cables will probably cause
interference to radio or TV reception.
3.3. CHOOSING THE RIGHT PLACE
• Place the electronic device somewhere out of the reach of children so as to avoid accidents.
• The baby unit must be situated at least 1 and 1.5 meters away from the baby's cot. Never place
the baby unit inside the cot, bed or playpen, nor secure the tripod to them. Make sure that the
unit, the cables and the adapter are well out of the reach of the baby and other young children.
• Put the baby monitor in a place where the air can circulate freely. Do not place it on duvets or
soft blankets nor in the corners of cupboards, shelves etc.
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

89176

Tabla de contenido