miniland baby Digital Camera Plus Manual Del Usuario página 18

ENGLISH
Note 1: When one of the cameras is out of range or is not switch on, the monitor will warn you
and the Scan Mode will stop.
Note 2: The Scan mode can be turned on or off by pressing the
main screen.
5.2.5. PAIRING CAMERA
This product is designed to allow the observation of different areas with up to 4 cameras
(channels 1, 2, 3 or 4 assigned to different cameras). The monitor and the original camera leave
the factory with channel 1 programmed. If you need to add an extra camera, follow the process
set out below.
1. Press for 3 seconds the Menu/Back
2. Press the UP
key enter into the sub-menu.
3. Press the UP
press the key.
4. Press the UP
camera and confirm the selection with the
5. While the ON/pairing LED indicator (1) is flashing in green, press the link button on the camera
(VI).
6. Once paired, the LED indicator will stop flashing and the image of the camera will show
immediately on the monitor unit screen.
7. If unsuccessful, please repeat above steps.
Note 1: You will only be able to select the channels where no camera has been paired yet.
Note 2: It is not possible to enter this submenu if 4 cameras have already been paired.
For various reasons you may lose the connection between the monitor and a camera which is
already connected. Should this be the case, repeat the process explained above to connect the
camera with the monitor again.
5.2.6. DELETE CAMERA
To delete one of the cameras connected, follow the next steps:
1. Press for 3 seconds the Menu/Back
2. Press the UP
key enter into the sub-menu.
3. Press the UP
then press the key.
4. Press the UP
the selection with the
Note 1: If you only have one camera paired to the monitor, you won't be able to remove it and
you won't be allowed to enter this submenu.
Note 2: A channel needs to be deleted before pairing to a new camera unit.
5.2.7. CAMERA VOLUME
This menu will allow you to configure the volume level at which the parents' voices will be
reproduced on the camera by using the two-way function and the volume at which the lullabies
will be heard.
key or DOWN key until the camera icon
key or DOWN key until the add camera icon
key or DOWN key to select the channel where you want to add the new
key or DOWN key until the camera icon
key or DOWN key until the remove camera icon
key or DOWN key to select the camera you want to delete and confirm
key.
key and the menu will pop up.
key.
key and the menu will pop up.
18
button while viewing the
is highlighted then press the
is highlighted and then
is highlighted then press the
is highlighted and