miniland baby Digital Camera Plus Manual Del Usuario página 20

ENGLISH
7. TROUBLESHOOTING
Problem
No reception on the
monitor
Only black and white
images are displayed
You cannot hear the
parents' voice in the
baby unit
The camera does
not transmit
Interference or poor
reception
Possible Cause
Camera not turned on
Monitor not turned on
Camera: not plugged in to the
power adapter
Monitor: The power adapter
is not plugged
Monitor out or range
Connection lost between
the monitor and a camera
already linked
A wrong camera has been
selected
Check whether the camera is
in night vision/infrared mode
The volume setting of the
baby unit is too low
The camera is not turned on
Camera: the power adapter is
not plugged in
VOX mode or Standby mode
are active
Other electronic devices may
be interfering with the signal
The camera and monitor may
be too far apart
The battery power may be
too low
The camera or monitor may be
placed too close to many metal
objects
Solution
Press and hold down button (III) for 2
seconds
Press and hold down the power button
(5)
Plug in the power adapter
Plug in the power adapter
Move the monitor closer to the camera
Link the camera with the monitor again.
See section 5.2.5.
Change the camera number you are
watching. See section 5.2.3.
In order to view the images in colour,
increase the level of light in the room
the camera is in or check there is
nothing covering the camera´s light
sensor (II).
Set the volume to the highest level
Press and hold down button (III) for 2
seconds
Plug in the power adapter
To see the monitored area continuously,
disconnect the VOX or Standby mode on
the Monitor
Move them away from the device
Move the monitor closer to the camera
Plug in the power adapter
Move them away from the device
20