Technical Specifications - miniland baby Digital Camera Plus Manual Del Usuario

If the Baby Unit has
lost its link with the
Parent Unit

8. TECHNICAL SPECIFICATIONS

Frequency
Operating Range
Nº of configurable channels
Power (baby unit)
9 PRODUCT DISPOSAL INFORMATION
• Remember to dispose of the product responsibly.
• Do not mix products bearing the crossed -out bin symbol with your general household
waste.
• For the correct collection and treatment of these products take them to the collection
points designated by your local authority.
Alternatively contact the retailer who sold you the product.
Hereby, Miniland S.A. declares that this "89176 digital camera plus" is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The camera and monitor may
be too far apart
The link between both units
has been lost momentarily
The link between both units
has been lost
Move the monitor closer to the camera
Reset the units by disconnecting them
from the electrical power. Wait about
15 seconds before reconnecting. Allow
up to one minute for the Baby Unit and
the Parent Unit to synchronize.
Pair the camera and monitor again.
See 5.2.5.
2.4GHz FHSS
250m (straight line and open space)
4
Input: 100-240 VCA 50/60Hz
Output: 5V 800mA
21
ENGLISH