Information Mode - Zeizz VISULAS YAG III Instrucciones Para El Uso

The buttons and displays in Treatment mode have the following
functions:
Displays the selected focus shift mode
ANT - anterior focus shift
POST - posterior focus shift
0 - Zero focus shift
See
Laser warning lamp
This field lights up in yellow when the instrument is in
treatment READY mode and the aiming beam is switched
on. This warning lamp lights up in red when the laser is
fired.
Selection and display of pulse mode (burst)
(here: single pulse mode activated)
Single pulse
Double pulse
Triple pulse
Selection and display of energy levels
Energy levels
When this field is activated, the energy can be set using the
control knob. There are 22 energy levels.
In single-pulse mode, the lowest level corresponds to about
0.3 mJ, the highest to about 10 mJ.
The energy display indicates the average energy of the last
five shots, calculated for the currently selected energy level.
The output energy of the Nd:YAG laser may vary slightly.
You should therefore check the displayed energy value
regularly.
Energy and pulse counters
Display field
Displays the sum of the emitted pulses and the cumulative
energy.
Reset button
Touching this button resets the sum of emitted pulses and
the cumulative energy to zero.

Information mode

Switch to information mode
Touching this button switches to Information mode. See
page 44.
000000-1354-664 VISULAS YAG III 15.08.2005
Focus shift and defocusing
Operation
on page 56.
43