Promaker PRO-SB1800 Manual Del Usuario página 10

ASSEMBLY AND ADJUSTMENTS
REQUIRED TOOLS
LOOSE PARTS UNPACKING
This product requires assembly.
I raised out of the cardboard and place
it on a level work surface
NOTE: This tool is heavy. To avoid
back injury, keep your knees bent and
lift with your legs, not your back, and
get help when needed
WARNING!
Do not use this product if any of the
parts in the Loose Parts Lists are
already mounted on your product
when you unpack it. The parts in this
list are not assembled to the product
due to manufacturer and require
customer installation. Using a product
that may
assembled could result in personal
injury.
• Inspect the tool carefully to ensure
that no breakage
occurred during shipping.
have been improperly
or damage
Do not dispose of the packing material
until you have carefully inspected the
tool, identified all loose parts, and
operated the tool satisfactorily
NOTE: Remove the foam block from
between the saw housing and the
motor by first beveling the blade.
The saw is adjusted at the factory for a
precise cut. After mounting, check for
accuracy. If your transportation has
influenced the settings, refer to the
specific procedures explained in this
manual.
WARNING!
IIf any part is damaged or missing, do
not operate this tool until the parts are
replaced. Using this product with
damaged parts or missing could result
in serious personal injury.
WARNING!
Do not try to modify this tool or create
accessories not recommended for use
with this tool. Any such alteration or
modification is misuse and could lead
to a dangerous condition that could
cause serious personal injury.
WARNING!
Do not connect to power supply until
assembly is complete. Failure to
follow this rule can lead to accidental
starting and
personal injury.
WARNING!
Never stand directly in line with the
blade or allow your hands to come
within 3 inches of the blade. Do not
reach over or over the other side of
the blade. Failure to heed this warning
can result in serious personal injury.
WARNING!
To avoid serious personal injury,
always make sure the table saw is
securely mounted on a workbench or
on an approved leg stand. NEVER
operate the saw on the ground.
possible serious
10