Promaker PRO-SB1800 Manual Del Usuario página 6

Some of the following symbols may be
used on this tool. Please study them
and learn their
interpretation of these symbols will
allow you to operate the tool better and
in a safer way.
SYMBOL NAME
Security Alert
Read the User
Manual
Eye Protection
V Volts
A Amperes
HZ Hertz
min Minutes
~ Alternating
Current
n No Load Speed
º
.../min Per Minute
GUIDELINES FOR THE USE OF THE
EXTENSION
Do not abuse extension cords and do
not pull on any cords to disconnect.
Always disconnect the extension cord
from the power
disconnecting the product from the
extension cord. When using a power
tool at a considerable distance from the
power source, use an
meaning Proper
EXPLANATION
Indicates
a possible risk
of personal injury
To reduce the
risk of injury
user must read
and understand
user manual
before using this
product.,
Always wear eye
protection with
marked side
shields to comply
with ANSI Z87.1.
Voltage
Stream
Frequency
(cycles per second)
Weather
Type of current
Rotation speed,
no load
Revolutions, runs,
surface speed,
orbits, Etc,
per minute.
CORD
source before
extension cord heavy enough to handle
the current drawn by the tool. An
excessively small extension cord will
cause a drop in line voltage, resulting
in a loss of power and causing the
motor to overheat. Use the chart
provided below
minimum wire size required in an
extension cord. Only round cables
listed by Underwriter's Laboratories
(UL) should be used.
**Amperage (on the face plate of the tool)
0-2.0 2.1-
3.4
Cable
length
25' 16 16
50' 16 16
100' 16 16
**Used on 12 gauge - 20 amp circuit
NOTE: AWG = American Wire Gauge
Before using
inspect it for loose or exposed wires
and cut or worn insulation.
WARNING!
Keep the extension cord out of the work
area. Position the cable so that it is not
trapped
on wood, tools, or other obstructions
while working with a power tool. Failure
to do so can result in serious personal
injury.
WARNING!
Check extension cords before each
use. If they are damaged, replace them
immediately. Never use the product with
a damaged cord, as touching the
damaged area could cause an electric
shock that could cause serious injury.
ELECTRICAL
This product is powered by a precisely
constructed electric motor. It must
be connected to a power source
that is 120V,
household current),
to determine
3.5- 5.1- 7.1-
5.0 7.0 12.0
Wire Size (A.W.G.)
16 16 14
16 14 14
14 12 10
an extension
CONNECTION
AC only (normal
the
12.1-
16.0
14
12
-
cord,
6