Description, Specifications And Standard Equipment Description; Specifications - RIDGID 141 Manual De Instrucciones

Model 141/161 Receding Geared Threaders
• Follow instructions on proper use of this machine.
Do not use for other purposes such as drilling
holes or turning winches. Other uses or modifying
this power drive for other applications may increase the
risk of serious injury.
• Read and understand the instructions and warn-
ings for all equipment being used including Thread -
ing Machines and Power Drives before operating
the Geared Threaders. Failure to follow all warnings
and instructions may result in property damage and/or
serious injury.
• Do not use this machine if the foot switch is bro-
ken or missing. Foot switch is a safety device that
provides better control by letting you shut off the motor
in various emergency situations by removing your
foot from the switch. For example: if clothing should
become caught in the machine, the high torque will
continue pulling you into the machine. The clothing
itself can bind around your arm or other body parts with
enough force to crush or break bones.
The EC Declaration of Conformity (890-011-320.10) will
accompany this manual as a separate booklet when
required.
If you have any question concerning this RIDGID
– Contact your local RIDGID distributor.
– Visit www.RIDGID.com to find your local RIDGID con-
tact point.
– Contact RIDGID Technical Services Department at
rtctechservices@emerson.com, or in the U.S. and
Canada call (800) 519-3456.
Description, Specifications and
Standard Equipment
Description
The RIDGID ® Model 141 and 161 Receding Geared
Thread ers are designed to thread 2
pipe, respectively. A cam type workholder is used to grip
the pipe while the die head cuts the threads. A clutch is
included to prevent jamming at the end of the thread.
The threaders can be used for both tapered and straight
right hand threads with a simple adjustment. See specifi-
cations for NPT and BSPT versions.

Specifications

Model No. Thread Type
141 NPT
141 BSPT
161 NPT
4
® product:
1 / " to 4" and 4" to 6"
2
Threads Per Inch
inch
8 2½ to 4
11 2½ to 4
8 4 to 6
The 141 and 161 can be powered in a variety of ways,
including operation by hand or with various RIDGID
Threading Machines and Power Drives.
Drive Shaft
Die
(Set of 5)
Die Head
Pinion
Sleeve
Stop
Screw
Grease
Fitting
Cam Plate
Knob (2)
Clamp Screw
Figure 1 – Model 141 Receding Geared Threader
Drive Shaft
Die Head
Pinion
Sleeve
Stop
Screw
Cam Plate
Knob (2)
Work Holder Jaws (3)
Figure 2 – Model 161 Receding Geared Threader
Nominal Capacity
mm
65 to 100
65 to 100
100 to 150
Thread Size
Marks )
Guide
Post
Guide
Post
Screw
Selector
Plate
Warning
Label
Work Holder
Jaws (2)
Work Holder
Die (Set of 5)
Thread
Size Marks
Guide
Post
Guide
Post
Screw
Gear Case
Warning
Label
Clamp
Screw
Selector Plate
Work Holder
Weight
lb kg
93 42.2
93 42.2
158 71.7