Luminance Brands Kathy Ireland Home CF835AP00 El Manual Del Propietario página 18

12. Installing the Light Fitter Assembly and Shade
12.3
Connect the Ceiling Fan Blue Wire to the Light
Fitter Black Wire . Use one of the Wire Connectors
(previously removed) to make the connection
(Figure 27) .
12.4
Remove and Retain the Three #8-32 x 8 mm Flat Head
Screws from the Switch Housing (Figure 28) .
Carefully tuck all Wires and Splices into the Switch
Housing .
WARNING
!
To avoid fire or electrical shock, be careful not to
pinch wires between the switch housing and the
switch housing cover.
NOTE: The Switch Housing Cover has a Long
Slot that Has To Line Up with the Reverse Switch
and a Curved Slot that Has To Line Up with the
Pull Chain, both located inside the Switch Housing.
Align the Three Switch Housing Cover Screw Holes
with the Three Switch Housing Screw Holes .
Reinstall and Tighten the Three Switch Housing
Screws, previously removed, to secure the Light Fitter
Assembly to the Switch Housing (Figure 28) .
A spare #8-32 x 8 mm Flat Head Screw is in the
hardware bag, if needed .
SWITCH HOUSING
SWITCH HOUSING
BLUE WIRE
LIGHT FITTER
BLACK WIRE
WIRE
CONNECTOR
LIGHT FITTER
ASSEMBLY
Figure 27
SWITCH
HOUSING
PULL CHAIN
CURVED SLOT
SWITCH HOUSING
COVER
SWITCH HOUSING
#8-32 x 8 mm
FLAT HEAD
SCREWS (3)
SWITCH
HOUSING COVER
LIGHT FITTER
ASSEMBLY
Figure 28
18
(Cont'd.)
REVERSE SWITCH
LONG SLOT
ETL Model No.: CF835