No Light Installation - Luminance Brands Kathy Ireland Home CF835AP00 El Manual Del Propietario

14.3
Remove and Retain the Three #8-32 x 8 mm Flat Head
Screws from the Switch Housing (Figure 37) .
Be sure all Wires are inside the Switch Housing .
WARNING
!
To avoid fire or electrical shock, be careful not to
pinch wires between the switch housing and the
switch housing cover.
NOTE: The Switch Housing Cover has a Long Slot
that Has To Line Up with the Reverse Switch and
a Curved Slot that Has To Line Up with the Pull
Chain, both located inside the Switch Housing.
Align the Three Switch Housing Cover Screw Holes
with the Three Switch Housing Screw Holes .
Reinstall and Tighten the Three Switch Housing
Screws, previously removed, to secure the Switch
Housing Cover to the Switch Housing (Figure 37) .
A spare #8-32 x 8 mm Flat Head Screw is in the
hardware bag, if needed .
SWITCH
HOUSING
PULL CHAIN
CURVED SLOT
SWITCH HOUSING
COVER
SWITCH
HOUSING
#8-32 x 8 mm FLAT
HEAD SCREWS (3)
SWITCH
HOUSING COVER
Figure 37
22
REVERSE SWITCH
LONG SLOT
ETL Model No.: CF835