Parker Parflange 1050 Manual De Manejo página 168

-8K1 Conductor Hydraulic Motor ON
-8K2 Conductor Unit Motor ON
-8K3 Interface Relay Lubrication ON
-8Y1 Valve System Pressure
-8Y2 Valve Clamping Cylinder
Forward
-8Y3 Valve Clamping Cylinder
Backwards
-8Y4 Valve Flange Unit Forward
-8Y5 Valve Flange Unit Backward
-9Y1 Valve Flange Unit Slow Speed
-9P1 Parts Counter
-12Y1 Valve Compreesed Air ON
-12Y2 Valve Safety Clap Close
-12Y3 Valve Feeder Jaw Down
-12Y4 Valve Clamping Cylinder
Sleeve Close
-12Y5 Valve Feeder Jaw To
Reception Position
-12Y6 Valve Separation Cylinder
Forward
Laserswitch -11B5 ON
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
-2S2 Emergency Stop Active
2K1/-2K2 Security Clap Closed
Reserve
-5S3 Limit Switch Pin Lubrication Unit
Empty
-5S3 Limit Switch Pin Lubrication Unit
Empty
-5S4 Flange Unit In Front
-5B1 Flange Unit Slow Speed
-5B2 Flange Unit At The Back
-6S1 Clamping Cylinder Pre-closed
-6B1 Clamping Cylinder Closed
-6B2 Clamping Cylinder Open
-6B3 Limit Switch Tube Stop Active
-6A1 Perma STAR CONTROL Active
-6A1 Perma STAR CONTROL Failure
-10B1 Compressed Air O.K.
Reserve
-10B3 Feeder Jaw Up
-10B4 Feeder Jaw Down
-10B5 Feeder Jaw In Reception
Position
Reserve
-10B7 Pressure Switch Feeder Jaw
Closed
Reserve
-11B1 Separation Cylinder At The Back
-11B2 Separation Cylinder In Front
Reserve
-11B4 Sleeve Is In Separation
-11B5 Sleeve Is Still In The Tool
Reserve
-11S1 Switch Feeder Activity
-11S1 Switch Feeder Not Activity