Parker Parflange 1050 Manual De Manejo página 56

Parflange 1050
Sleeves not separated
Sleeve not in the tool
Separation not forward
Separation not backward
Compressed air is missing
Light barrier for query of
the magazine not triggered.
Laser sensor for the query
of the tool insertion is not
activated
Sensor for inquiry position
"separation forward" is not
activated.
• Feeder jaw / sensor
not in correct
position
• Sensor / connection
line defective
Sensor for inquiry position
"separation backward" is
not activated.
• Feeder jaw / sensor
not in correct
position
• Sensor / connection
line defective
Pressure switch for checking
the compressed air supply is
not activated. No, or
insufficient, compressed air
supply
55
Fill magazine with sleeves /
remove jammed sleeves/
check light barrier –11B4 /
Acknowledge the
disturbance after its cause
has been cleared.
Activate emergency-OFF,
check position of the
sleeve, correct sleeve
position if required or
remove.
Check/clean sensor–11B5.
Acknowledge the
disturbance after its cause
has been cleared.
Activate emergency-OFF,
check the position of the
axis / sensor –11B2,
Acknowledge the
disturbance after its cause
has been cleared
Press Emergency-off,
check the position of the
axis / sensor –11B1,
Acknowledge the
disturbance after its cause
has been cleared
Check the available
compressed air at the
manometer attached to the
side/ Check Pressure switch
–10B7