Trouble-Shooting - Parker Parflange 1050 Manual De Manejo

Parflange 1050
9.

Trouble-Shooting

All repair works bear an increased accident risk!
Repair works on electric equipment or machines may be carried
out by trained electricians only!
All security facilities have to be replaced and their functions
checked after carrying out any of the works mentioned above!
Display message
Dies not closed
Dies not open
Flange unit not in forward
position
Flange unit not in
backward position
Pin lubrication empty
Safety flap not closed
Emergency stop activated
Failure circuit breaker
Failure
Switch -6B1/I1.1
Tube not in right position
Failure perma STAR
CONTROL
Perma STAR CONTROL
lubrication empty
Cause
run time monitoring of
motion has responded
run time monitoring of
motion has responded
run time monitoring of
motion has responded
run time monitoring of
motion has responded
storing container of the tool
lubrication has run dry
switch of the safety flap is
not activated
emergency stop was
pressed
overload current on a
circuit breaker (flange unit
or hydraulics)
Switch defective
stop contact was not
activated long enough
when the dies were closed
error message from the
lubrication drive
cartridge of the lubrication
empty
52
Solution
drive to start position/
check the movement area
of the tension lever / check
the terminal switch
/ restart function /
and -6B1
check function without tool
drive to start position/
check the movement area
of the tension lever / check
the terminal switch
restart function
check the terminal switch
/ is the tool
–5S4
assembled?
check the terminal switch
–5B2
refill oil 1030 LUBSS /
Parker
unlock flap manually /
restart function
unlock emergency stop
switch released circuit
breaker back on
Check Switch –6B1/ change
Grundstellung anfahren /
Check tool
check lubrication drive,
counter-pressure too high,
cable possibly broken
replace cartridge according
to instructions
–6S1
/
–6B2