Troubleshooting - Alcatel Onetouch Go Watch SM03 Manual Del Usuario

Battery
GB
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if:
(i) The battery has been charged by a battery charger not
specified or approved by TCL Communication Ltd. for
charging the battery;
(ii) Any of the seals on the battery are broken or show evidence
of tampering; or
(iii) The battery has been used in equipment other than GO
WATCH for which it is specified.
Software
•
Software Embodied in Physical Media.
No warranty is made that the software will meet your
requirements or will work in combination with any hardware
or software applications provided by third parties, that the
operation of the software products will be uninterrupted or
error free, or that all defects in the software products will
be corrected.
• Software NOT Embodied in Physical Media.
Software that is not embodied in physical media (e.g. software
that is downloaded from the Internet), is provided "as is" and
without warranty.
25
Go Watch_SM03_Regulation Leaflet_For ALWE_20151028.indd 25-26

Troubleshooting

Refer to the instructions below before contacting our aftersales
service:
Your GO WATCH can't be detected.
• Press the Power or Back key to light up the screen. Your
GO WATCH can be detected for only 3 minutes after the
screen is off.
•
Turn on Bluetooth if it is disabled.
•
Enable the Bluetooth service to search for devices.
Your GO WATCH fails to pair with your phone or the
pairing is slow.
• Press the Power or Back key to light up the screen. Your
GO WATCH can be detected for only 3 minutes after the
screen is off.
Your GO WATCH often disconnects from your phone.
• The background Onetouch Move service stops. Restart the
application.
•
Make sure your GO WATCH is not too far away from
your phone.
GB
26
2015/10/28 16:49:02