Environmental - Siemens POINTEK CLS200 Manual De Arranque Rápido

Active Shield Length (CLS300 only):
Active
Shield
Threaded
Standard
125 mm/4.92"
length
Extended
250 mm/9.84"
shield
Extended
400 mm/15.75" 380 mm/14.96" 750 mm/29.53"
shield
Enclosure
• termination
• construction
• optional thermal isolator
• cable entry
• ingress protection
The use of approved watertight conduit hubs/glands is required for Type 4 /
Note:
NEMA 4, Type 6 / NEMA 6, IP68 (outdoor applications).For CE requirements the use
of EMC rated cable entries is required for all CLS200 devices and for CLS300 devices
with flange process connections.
Weight
Weight varies based on configuration. For example:
• compact Pointek CLS200/300, 1 kg (2.20 lb.) approx.
100 mm (4") insertion length,
3/4" process connection

Environmental

• location
• altitude
• ambient temperature
- general applications
- in potentially explosive
atmospheres
• storage temperature
• relative humidity
• installation category
• pollution degree
1.
Or 1.4404 material.
7ML19985JH04
Length
Flanged
105 mm/4.13"
230 mm/9.06"
removable terminal block, conductor
cross-section 2.5 mm
epoxy-coated aluminum with gasket
316L
2 x M20 thread (option: 1 x 1/2" NPT with adaptor,
and 1 x plugged entry)
Type 4 / NEMA 4 / IP65 standard, IP68 optional
indoor/outdoor
2000 m (6562 ft.) max.
–40 to 85 °C (–40 to +185 °F)
refer to appropriate certificate
–40 to 85 °C (–40 to +185 °F)
suitable for outdoor (Type 4 / NEMA 4 / IP68)
II
4
Pointek CLS200/300 Standard – OPERATING INSTRUCTIONS
Minimum insertion length
Cable
Rod version
version
350 mm/13.78" 500 mm/19.69"
500 mm/19.69" 1000 mm/40"
1000 mm/40"
2
max.
1
stainless steel
High Temp.
version
350 mm/13.78"
500 mm/19.69"
750 mm/29.53"
Page 9