Process Cautions - Siemens POINTEK CLS200 Manual De Arranque Rápido

Process Cautions

Cautions:
• The maximum allowable torque on a horizontally installed rod is 15 Nm.
• Keep unit out of path of falling material, or protect probe from falling material.
Caution: Consider material surface
configuration when installing unit.
Caution: Avoid areas where material build up
occurs.
Page 16 Pointek CLS200/300 Standard – OPERATING INSTRUCTIONS
Caution: Tensile load must not exceed
probe or vessel rating (See
(max)
on page 7.).
Tensile
50 mm
(2") min
7ML19985JH04