Installation: Pointek Cls300 Standard; Location; Mounting - Siemens POINTEK CLS200 Manual De Arranque Rápido

Installation: Pointek CLS300 Standard

Notes:
• Installation shall only be performed by qualified personnel and in accordance with
local governing regulations.
• This product is susceptible to electrostatic shock. Follow proper grounding
procedures.
• The housing may only be opened for maintenance, local operation, or electrical
installation.
• Before installing the instrument, verify that the environment complies with any
restrictions specified on the product nameplate.
• To ensure compliance with CE EMC regulations, please install in accordance with
the testing details on page 11.

Location

Recommended:
• Provide a sun shield to protect the transmitter from direct heat radiation.
Precautions:
• Avoid mounting Pointek CLS300 Standard in locations subject to strong vibrations in
the vicinity, whenever possible.
• Do not exceed the permissible ambient temperature limits (see
page 9 for details).

Mounting

Pointek CLS300 typical configuration:
High level alarm
For high level alarm (level exceeds normal process level):
• normally mounted into the vessel top, or
• mounted through the tank wall at the detection level
For low level alarm (level drops below normal process level):
• mounted through the tank wall at the detection level
7ML19985JH04 Pointek CLS200/300 Standard – OPERATING INSTRUCTIONS
vertical
normal process
level
Environmental
Low level alarm
horizontal
on
normal process
level
detection level
Page 17