Siemens POINTEK CLS200 Manual De Arranque Rápido página 5

Level Measurement
Point level measurement
RF Capacitance switches
Pointek CLS300 - Standard
Selection and Ordering data
Pointek CLS300 - Standard - Cable Version
with Threaded or Flanged process connection
Inverse frequency shift capacitance level and
material detection switch with optional rod/cable
choices and configurable output. CLS300 is ideal
for detecting liquids, solids, slurries, foam, and
interfaces in demanding conditions where high
pressure and temperatures are present, and has
the ability to tune out buildup on the probe.
Thermal isolator
Without thermal isolator
With thermal isolator [for process connection
temperatures over 85 °C (185 °F)]
Wetted seals
FKM
FFKM [for process temperatures above
-20 °C (-4 °F)]
4
Probe material
Bare 316L stainless steel cable, PEEK isolators and
316L stainless steel cable weight
PFA coated cable, PEEK isolators and 316L
stainless steel cable weight
Approvals
Dust Ignition Proof with IS Probe:
CE, RCM, ATEX II 1/2 D T100 °C
Flameproof Enclosure with IS Probe:
CE, RCM, ATEX II 1/2 G EEx d[ia] IIC T6 ... T1,
ATEX II 1/2 D T100 °C
Flameproof Enclosure with IS Probe,
with WHG approval:
CE, RCM, ATEX II 1/2 G EEx d[ia] IIC T6 ... T1,
ATEX II 1/2 D T100 °C
Dust Ignition Proof with IS Probe:
CSA/FM Class II, Div. 1, Groups E, F, G
CSA/FM Class III T4
Explosion Proof Enclosure with IS Probe:
CSA/FM Class I, Div. 1, Groups A, B, C, D
CSA/FM Class II, Div. 1, Groups E, F, G
CSA/FM Class III T4
General Purpose (CSA, FM)
General Purpose (CE, RCM)
General Purpose with WHG approval
(CSA, FM, CE, RCM)
Enclosure and lid
Aluminum epoxy coated
2 x ½" NPT via adapter - cable inlet, IP65
2 x M20 x 1.5 cable inlet, IP65
2 x ½" NPT via adapter - cable inlet, IP68
2 x M20 x 1.5 cable inlet, IP68
Active shield length
Standard length -
(125 mm threaded, 105 mm flanged)
Extended shield -
(250 mm threaded, 230 mm flanged)
Extended shield -
(400 mm threaded, 380 mm flanged)
1)
Available with Probe version options A, B, F ... K, only
[t 1 000 mm (39.7 inch)].
4/44 Siemens FI 01 · 2018
© Siemens AG 2018
Article No.
7ML5651-
-
7 7 7 7 7 7 7 7 7
0
1
0
1
0
1
C
D
E
F
G
H
J
K
A
B
C
D
0
1
2
1)
Selection and Ordering data
Further designs
Please add "-Z" to Article No. and specify Order
code(s).
Total insertion length: enter the total insertion length
in plain text description
Stainless steel tag [70 x 13 mm (2.75 x 0.5 inch)]:
Measuring-point number/identification
(max. 27 characters) specify in plain text
Manufacturer's test certificate: M to DIN 55350,
Part 18 and to ISO 9000
Material Inspection Certificate Type 3.1 per
EN 10204
Operating Instructions
All literature is available to download for free, in a
range of languages, at http://www.siemens.com/
processinstrumentation/documentation
Accessories
Order code
Y01
Y15
C11
C12
See page 4/53