In Case Of Power Failure; Surface Burners - Monogram ZDP484NGTSS Manual De Instrucciones

Ocultar thumbs Ver también para ZDP484NGTSS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USING THE RANGE
ACCENT LIGHTING CONTROL
This button controls the LED accent lighting to the control
panel. Custom color options for the knob and task lighting
are available through the app.
IN CASE OF A POWER FAILURE
In the event of a power failure, the oven is inoperable and
no attempt should be made to operate it. The right front
Precision burner is also inoperable if there is a power
failure. However, the surface burners may be lit with a

SURFACE BURNERS

Lighting a Surface Burner
WARNING
Burners should be operated only when
covered by cookware. Burner flames not covered by
cookware present a risk of fire or clothing ignition.
Never let flames extend beyond the sides of the
cookware. Failure to comply may result in serious
injury.
Make sure all burners are in their correct locations and
fully assembled before attempting to operate any burner.
Select a burner and find its control knob. Push the knob in
and turn it to the LITE position.
Selecting a Flame Size
Watch the flame, not the knob, as you adjust heat. When
rapid heating is desired, the flame size should match the
size of the cookware you are using. Flames larger than
the bottom of the cookware will not heat faster and may be
hazardous.
Using the Surface Burners
NOTES:
time without cookware on the grate. The finish on the
grate may discolor or chip without cookware to absorb
the heat.
burner is on. Damage to the product may occur.
place your hand, a pot holder or cleaning materials on
them.
49-2000877 Rev. 1
match. Using extreme caution, hold a lit match near the
ports beneath the surface burner cap, then slowly turn the
knob to the LITE position. Once lit, surface burners will
continue to operate normally.
the sound of the electric spark
igniting the burner. When one
burner is turned to LITE, all
burners will spark. Sparking will
continue as long as the knob
remains at LITE. Once gas is
ignited, turn the knob to adjust
the flame size.
Automatic Reignition
The burners on this range will automatically relight if the
flame goes out.
These flames are too large for the pot
Your rangetop has sealed gas burners that offer
convenience, cleanability and flexibility for a wide range of
cooking applications.
Push the control knob in and
turn it to the LITE position.
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Zdp364ndtss

Tabla de contenido