Monogram ZDP484NGTSS Manual De Instrucciones página 15

USING THE RANGE
TRUETEMP PRECISION COOKING SYSTEM (Cont.)
Hestan Cue ® Cookware
6. Set pan temperature by sliding the temperatures left or
right.
NOTE: Burner may turn on and off automatically when
maintaining a low temperature setting or reducing the
temperature.
TRUETEMP™
PRECISION COOKING
250 275 300 325
TO OVEN
If a specific temperature is desired, press the highlighted
temperature.
350
°F
TO OVEN
49-2000877 Rev. 1
(Cont.)
10:35 AM
350
°F
375 400 425 450
NEXT
10:35 AM
1 2 3
4 5 6
7 8 9
0
X START
7. Knob lighting for the precision burner should now pulse
white. Make sure activated Hestan Cue
centered over the burner and turn the burner knob to
high position.
Setup will be cancelled after 2 minutes of inactivity.
TURN BURNER KNOB TO HIGH
Place your cookware on front right burner. To begin
TrueTemp™ Precision Cooking, turn the front right burner
knob to "HI"
The temperature set point will appear on the right
front burner graphic on screen. Temperature can be
changed by selecting the temperature status or using
the SmartHQ App.
COOKTOP
OFF
OFF
OFF
TO OVEN
Hestan cookware module battery:
If the unit cancels your precision cooking cycle, the
precision cooking device may need a battery replacement.
Replace the AAA battery located in the handle of the
Hestan Cue cookware. Please contact the device
manufacturer if problem persists after battery replacement.
To preserve battery life, twist module a quarter of a turn to
loosen module and disconnect pan when not in use.
® cookware is
10:35 AM
CANCEL
10:35 AM
OFF
Tap the temperature
status to set TrueTemp™
temperature or use
SmartHQ app to control
175
°F
remotely.
10:00
15