Using The Range; Connecting Your Wifi Enabled Oven - Monogram ZDP484NGTSS Manual De Instrucciones

USING THE RANGE

On initial setup, this oven requires a software update to
enable all features. To perform the update, download
the SmartHQ app and then follow instructions to connect
the oven to your home wifi network. Some features are
available only via the SmartHQ app. For more information
on how to get connected, reference the "Wifi & Remote
Enable" section of this guide.
CONNECTING YOUR WIFI ENABLED
OVEN
Your oven is designed to provide you with two-way
communication between your appliance and smart device.
By using the SmartHQ mobile app, you will be able to
control essential oven operations such as temperature
settings and cooking modes using your smartphone or
tablet.*
What you will need
Your oven uses your existing home WiFi network to
communicate between the appliance and your smart
device. In order to setup your oven, you will need to gather
some information:
1. Each oven has connected appliance information that
includes an Appliance Network Name and Password.
These are the two important details that you will need
to connect to the appliance. This information is found in
the WiFi Settings menu on the unit display.
2. Have your smart phone or tablet ready with the ability to
access the internet and download apps.
3. You will need to know the password of your home WiFi
router. Have this password ready while you are setting
up your oven.
Connect your oven
1. On your smart phone or tablet visit
GEAppliances.com/connect to learn more about
connected appliance features and to download the
SmartHQ mobile app.
2. Follow the app onscreen instructions to connect your
oven.
3. Once the process is complete, the connection icon
will change to a solid on state when connection is
successful.
4. If the connection icon does not change to a solid on
state, follow the instructions on the app to reconnect. If
issues continue please call at 800.220.6899 and ask for
assistance regarding oven wireless connectivity.
To connect additional smart devices, repeat steps 1 and 2.
Note that any changes or modifications to the remote
enable device installed on this oven that are not expressly
approved by the manufacturer could void the user's
authority to operate the equipment.
* Compatible Apple or Android devices and home WiFi network required.
49-2000877 Rev. 1
REMOTE ENABLE EQUIPMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
The wireless communication equipment installed on this
range has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to:
(a) provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
for help.
(b) accept any interference received, including interference
that may cause undesired operation of the device.
Note that any changes or modifications to the wireless
communication device installed on this oven that are not
expressly approved by the manufacturer could void the
user's authority to operate the equipment.
9