Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 37
Fig. 7 Booster unit with four modules connected in series with
bypass, mounted above each other.
Bypass
= Air escape valve
= Isolating valve
= Non-return valve
= Pressure switch
= Flow switch
= Pressure gauge
= Motor-operated valve
= Diaphragm tank
All modules are supplied without non-return valve.
Booster modules connected in parallel may also be installed verti-
cally.
Note: As venting problems may arise in such installations, it is
advisable to install suitable air vent devices.

5. Pipe connection

The booster modules are fitted with clamp liners for Victaulic/PJE
clamp couplings on the suction and discharge sides. The loose
clamp liners (fig. 8), which can be ordered as accessories for the
modules, are to be welded onto the system pipes. The clamp liner
is positioned as shown in fig. 9.
Fig. 8
Welding side
Fig. 9
Gap
Pipe system
Clamp liners
Moisten the clamp liner of the booster module with water and
press the rubber sleeve around the liner (fig. 10).
Moisten the clamp liner on the pipe with water. When the module
is mounted, position the clamp liners with a gap as shown in the
table below (fig. 9).
6
4
3
2
1
Air escape valve
Closing valve
Non return valve
Pressure switch
Flow switch
Pressure gauge
Motor operated valve
Diaphragm tank
16 mm
Booster module
Size
Type
BM 4"
BM 3A - BM 8A
BM 6"
BM 17 - BM 60
BM 8"
BM 30 - BM 46
BM 8"
BM 60
BM 8"
BM 77 - BM 95
BM 8"
BM 125
BMB 4"
BMB 3A - BMB 8A
BMB 6"
BMB 17 - BMB 60
BMB 8"
BMB 30 - BMB 46
BMB 8"
BMB 60
BMB 8"
BMB 77 - BMB 95
BMB 8"
BMB 125
Pull back the rubber sleeve so that it is placed halfway between
the two grooves of the clamp liners (figs. 9 and 11).
Fig. 10
Fig. 11
Moisten the two clamps with water (fig. 11) on the inside and
place them around the rubber sleeve (fig. 12). Fit the bolts and
nuts and tighten the nuts (fig. 13).
Fig. 12
Victaulic
Gap
coupling
[mm]
1¼"
ø42 mm
1
3"
ø89 mm
3
3"
ø89 mm
3
4"
ø114 mm
6
5"
ø139 mm
6
6"
ø168 mm
6
1¼"
ø42 mm
1
3"
ø89 mm
3
3"
ø89 mm
3
4"
ø114 mm
6
5"
ø139 mm
6
6"
ø168 mm
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bm 6Bm 8Bmb 4Bmb 6Bmb 8

Tabla de contenido