Medline MDS1001U Guía De Operación página 14

How to Apply the Arm Cuff
(Preferably the left arm.)
1. Insert the end of the cuff through the
D-Ring to make a loop. Makes sure
that the Velcro stays outside while this is done.
2. Wear the arm cuff with the hose running down
your arm in alignment with the brachial artery.
Pull the end of the cuff and secure it snugly
with the velcro.
3. Adjust the cuff so that the bottom edge is about
1 inch above the elbow on the inside of the
left arm. Please make sure that the artery marker
matches up with your brachial artery.
4. Plug in the air tube connector into the left side
of the monitor.
Air Tube Connector
-14-
Palm
Facing Up
1 inch