Stryker SIDNE 0240020925 Guia Del Usuario página 12

Receiver–Back
1. The AF level control adjusts the audio output level for both AF output
jacks. The default AF level is 50%, or positioned at "12 o' clock. "
2. The balanced audio output jack connects to an XLRM-type connector to
connect the receiver to a mixer or integrated amplifier.
3. The unbalanced audio output jack connects to an unbalanced mixer.
4. The cord hook secures the DC power cord to the receiver to avoid
accidental disconnection.
5. The ground lift switch disconnects the ground pin of the balanced
output jack from ground. Slide the switch to the right to eliminate
humming caused by a ground loop; otherwise, slide the switch to the left
for regular use.
6. The power input jack connects to the DC plug from the SIDNE® console.
7. The antenna input jack A connects to an antenna that is provided with
the package.
8. The antenna input jack B connects to an antenna that is provided with
the package.
10
8
1 2
7 6
3 4
5